教师姓名:张元祥
办公地点:309
办公电话:024-83685229
传真:024-23906472
电子邮件:redyuanxiang@126.com
职称:副教授
研究方向:薄带铸轧短流程成形技术、电工钢组织织构控制
通讯地址:辽宁省沈阳市和平区文化路3巷11号东北大学105信箱
邮政编码:110819
一、个人简历
受教育经历:
2004.9-2008.7:沈阳理工大学 材料成型及控制工程 本科
2008.9-2010.7:东北大学 材料加工工程 硕士研究生
2010.9-2017.4:东北大学 材料加工工程 博士研究生
研究工作经历:
2023/1 –至今,东北大学,轧制技术及连轧自动化国家重点实验室,副教授
2017/11 –2022/12,东北大学,轧制技术及连轧自动化国家重点实验室,讲师
二、主要研究项目
[1] 国家自然科学基金重点项目-基于双辊薄带连铸的高品质硅钢织构控制理论与工业化技术研究,50734001, 参与人;
[2] 国家自然科学基金钢铁联合基金重点项目-凝固、冷却及热处理一体化柔性调控无取向硅钢夹杂物与析出物的基础研究,U1260204,主要参与人;
[3] 国家自然科学基金面上项目-非等温热激励大变形薄带连铸Fe-Si 合金的超快速再结晶与择优取向研究,51174059,主要参与人;
[4] 企事业单位合作科技项目-短流程薄带铸轧高品质钢产业化系列关键技术研发,钢种与工艺设计。
三、代表性成果(论文/专著/专利/获奖等)
论文情况:
[1] Zhang Y X, Xu Y B, Liu H T, Li C G, Cao G M, Liu Z Y, Wang G D. Microstructure, texture and magnetic properties of strip-cast 1.3% Si non-oriented electrical steels. Journal of Magnetism & Magnetic Materials, 2012, 324(20):3328-3333.
[2] Zhang Y X, Fang F, Xu Y B, Wang Y, Lu X, Cao G M, Li C G, Yu Y M. Research on the Abnormal Grain Growth of Goss Grains in Strip-Cast 4.5%Si Grain-Oriented Electrical Steels. Applied Mechanics & Materials, 2014, 633-634:858-864.
[3] Zhang Y X, Wu L G, Xu Y B, Wang Y, Chen L Q, Yu Y M, Wang G D. Effect of Secondary Cooling on Microstructure, Texture and Properties of 1.2wt% Si Non-Oriented Electrical Steel Processed by Twin-Roll Strip Casting. Key Engineering Materials, 2014, 622-623:798-803.
[4] 张元祥, 许云波, 刘振宇, 王国栋. 双辊薄带连铸1.2%Si无取向电工钢组织和析出物. 东北大学学报(自然科学版), 2012, 33(5):653-656.
[5] 张元祥, 许云波, 刘振宇, 王国栋. 双辊薄带连铸对无取向硅钢织构和磁性能的影响. 材料热处理学报, 2012, 33(8):64-68.
2. 非第一作者论文:
[6] Xu Y B, Zhang Y X, Wang Y, Li C G, Cao G M, Liu Z Y, Wang G D. Evolution of cube texture in strip-cast non-oriented silicon steels[J]. Scripta Materialia, 2014, 87(4):17-20.
[7] Wang Y, Zhang Y X, Lu X, Fang F, Xu Y B, Cao G M, Li C G, R.D.K. Misra, Wang G D. A novel ultra-low carbon grain oriented silicon steel produced by twin-roll strip casting[J]. Journal of Magnetism & Magnetic Materials, 2016, 419:225-232.
[8] Fang F, Zhang Y X, Lu X, Wang Y, Cao G M, Yuan G, Xu Y B, Wang G D, R.D.K. Misra. Inhibitor induced secondary recrystallization in thin-gauge grain oriented silicon steel with high permeability[J]. Materials & Design, 2016, 105:398-403.
[9] Wang Y, Zhang Y X, Lu X, Fang F, Cao G M, Li C G, Xu Y B, R.D.K. Misra, Wang G D. Effect of Hot Rolling on Texture, Precipitation, and Magnetic Properties of Strip‐Cast Grain‐Oriented Silicon Steel[J]. Steel Research International, 2016.
[10] Yu Y M, Zhang Y X, Li C S, Wang G D. Effect of TSCR Process on Cold Rolling Texture of Fe-3% Silicon Steels[J]. Advanced Materials Research, 2010, 160-162: 488-491.
[11] Wang Y, Xu Y B, Zhang Y X, Xie S Q, Yu Y M, Wang G D. On abnormal growth of {210} <001>grain in grain-oriented silicon steel[J]. Materials Research Bulletin, 2015, 69: 138-141.
[12] Wang Y, Xu Y B, Zhang Y X, et al. Effect of annealing after strip casting on texture development in grain oriented silicon steel produced by twin roll casting[J]. Materials Characterization, 2015, 107:79-84.
[13] Wang Y, Xu Y B, Zhang Y X, Fang F, Lu X, R.D.K. Misrab, Wang G D. Development of microstructure and texture in strip casting grain oriented silicon steel[J]. Journal of Magnetism & Magnetic Materials, 2015, 379:161-166.
[14] Lu X, Fang F, Zhang Y X, Wang Y, Yuan G, Xu Y B, Cao G M, R.D.K. Misrab, Wang G D. Influence of Rolling Reduction on Secondary Recrystallization and Magnetic Properties in Strip‐Cast Grain‐Oriented 4.5%Si Steel[J]. Steel Research International, 2016.
[15] Fang F, Xu Y B, Zhang Y X, Lu X, R.D.K Misrab, Wang G D. Evolution of recrystallization microstructure and texture during rapid annealing in strip-cast non-oriented electrical steels[J]. Journal of Magnetism & Magnetic Materials, 2015, 381:433-439.
[16] Fang F, Lu X, Zhang Y X, Wang Y, Jiao H T, Cao G M, Yuan G, Xu Y B, R.D.K. Misrab, Wang G D. Influence of cold rolling direction on texture, inhibitor and magnetic properties in strip-cast grain-oriented 3% silicon steel[J]. Journal of Magnetism & Magnetic Materials, 2016, 424:339-346.
[17] Wang Y, Xu Y B, Zhang Y X, He Z Y, Fu S J, Yu Y M, Wang G D. Characterization of Initial Structures, Texture and Precipitates in Strip-cast 3wt%Si Steel Sheet[J]. Procedia Engineering, 2014, 81:1529-1534.
[18] Wang Y. Xu Y B, Zhang Y X, Fang F, Lu X, Wang G D. Inhomogeneous Distributions of Sub-Grains and Precipitates in Strip-Cast 3wt% Si Steel Sheet[J]. Materials Science Forum, 2016, 850:549-553.
[19] Wang Y, Xu Y B, Zhang Y X, Fang F, Lu X, Yu Y M, Wang G D. Cu2S and AlN Precipitates in Fe-3%Si-0.5%Cu Steel Produced by Low Slab Reheating Technique[J]. Advanced Materials Research, 2013, 790:69-72.
[20] 王洋,许云波,张元祥,王国栋. 冷轧工艺对取向硅钢初次再结晶织构的影响,东北大学学报,2014,35(2): 217-222.
专利情况:
[1] 许云波,张元祥,王洋,方烽,卢翔,焦海涛,曹光明,李成刚,刘振宇,王国栋. 双辊薄带连铸无取向硅钢过程中析出物与夹杂物控制方法:CN104226954B[P]. 2016,10.
[2] 许云波,张元祥,王洋,卢翔,方烽,焦海涛,曹光明,李成刚,刘振宇,王国栋. 快速冷却控制双辊薄带连铸低硅无取向硅钢磁性能的方法:CN104164618B[P]. 2016,08.
[3] 王国栋,张元祥,王洋,卢翔,方烽,曹光明,李成刚,许云波,刘振宇. 一种取向高硅钢的制备方法:CN104372238B[P]. 2016,05.
[4] 王国栋,许云波,王洋,张元祥,方烽,卢翔,曹光明,李成刚,刘振宇. 一种超低碳取向硅钢及其制备方法:CN104294155B[P]. 2016,05.
[5] 许云波,张元祥,王洋,曹光明,李成刚,刘振宇,方烽,卢翔,王国栋. 一种双辊薄带连铸制备1.5mm级Fe-Si合金带的方法:CN103602886B[P]. 2015,11.
[6] 王国栋,刘振宇,张晓明,李成刚,曹光明,张婷,张元祥. 一种无取向硅钢薄带及其制备方法:CN101967602B[P]. 2012,08.
[7] 王国栋,刘振宇,张晓明,李成刚,曹光明,张婷,张元祥. 一种高硅钢薄带及其制备方法:CN101935800B[P]. 2010,09.
[8] 方烽,曹光明,李成刚,卢翔,焦海涛,王鹤松,王洋,张元祥,许云波,袁国,刘振宇,王国栋. 一种高磁感取向硅钢极薄带的减量化制备方法:CN105385937A[P]. 2016,03.
[9] 许云波,张元祥,方烽,王洋,卢翔,焦海涛,曹光明,李成刚,刘振宇,王国栋. 控制双辊薄带连铸无取向硅钢磁性能的快速热处理方法:CN104178617A[P]. 2014,12.
[10] 许云波,张元祥,王洋,曹光明,李成刚,刘振宇,方烽,卢翔,王国栋. 一种双辊薄带连铸制备高效电机用无取向电工钢的方法:CN103614618A[P]. 2014,03.
[11] Wang G D, Zhang Y X, Wang Y, Lu X, Fang F, Cao G M, Li C G, Yuan G, Xu Y B,Liu Z Y, Wang Z D. A PREPARATION METHOD OF ORIENTED HIGH SILICON STEEL: US20160247613[P]. 2016, 08.